Here are the main differences between cut and coagulation of High Frequency Surgical Unit:

1. Different meanings

Cut: Concentrated heating of local tissue surface by high-density high-frequency current.

Coagulation: Lower high frequency power, lower current density for heating of bleeding and moist tissue.

2. Different voltage

Cut: The voltage in the CUT mode is slightly lower.

Coagulation: The voltage in the cut mode is relatively high.

3. Different heat production capacity

Cut: The electric cut mode has a large heat generation capacity.

Coagulation: The heat generation capacity of the electrocoagulation mode is small.

4. The frequency is different

Cut: The frequency of the CUT mode is higher than that of the COAG mode.

Coagulation: The frequency of coagulation mode is lower than that of cut mode.

5. Different characteristics

Cut: The tissue components of the tissue are rapidly expanded and burst to separate.

Coagulation: volatilize liquid components (mainly water) without reaching the extent of tissue bursting.